SKU: 12315055017
Diamond cutting blade 1A1RSS 230 Meteor
PROFESSIONAL CUTTING OF HEAVY CONCRETE
SKU: 12315055017
Diamond cutting blade 1A1RSS 230 Meteor
PROFESSIONAL CUTTING OF HEAVY CONCRETE
Speed
Lifetime
Cutting of reinforcement
Highly reinforced concrete
Diameter: 230 mm
Mounting hole: 22.23 mm
The product is out of production
Delivery
- In-store pickupFree
- GEIS, DHL, Schenker, TNTAccording to the carrier's tariffs
After ordering on the website, our regional partner will contact you and choose for you the best delivery method
Payment
- We currently offer the following payment methods
(Bank transfer, payment card, cash)
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Diamond cutting blade Distar 1A1RSS C3W Meteor is used for cutting medium and high-grade reinforced concrete.
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).
Shows a high speed and long lifetime while working even with heavy, highly reinforced concrete. In particular, when working with the power cutter, the speed reaches up to 2 meters per minute, with a lifetime up to 600 running meters. With floor saws, the lifetime reaches 700 meters at a speed up to 2.75 linear meters/min.
Available in several diameters from 300 to 600 millimeters. It is used in combination with floor saws and gasoline power cutters of medium power (from 5 to 13 kW).
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 230 mm blade diameter;
• cutting depth – 6 cm;
• pendular cutting;
• working with operational angle grinder with a power of 2.5 kW, with a rotational speed of 6500 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under other operating conditions the performance parameters may vary.
Material:
concrete B30 (M400), reinforcement Ø12 mm,
6 pcs/1 m
Feedback
Question