SKU: 17483523216
Grinding cup DGW-S 49/M14 Hard Ceramics 70
EASY TO GRIND WITHOUT REMOVING THE BLADE
SKU: 17483523216
Grinding cup DGW-S 49/M14 Hard Ceramics 70
EASY TO GRIND WITHOUT REMOVING THE BLADE
Speed
Lifetime
Ceramic
Porcelain gres
Diameter: 49 mm
Grain size: №70
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Try in bundle
Grinding cup DGW-S 49/M14 Hard Ceramics 70
49 mm
Characteristics
Diameter
Grain
Landing hole
Cooling
Purpose
Brand
Description
The grinding nut makes a ceramic edge of excellent quality in only a few seconds. Innovative patented product. The grinding nut is screwed onto the spindle of the angle grinder, clamping the cutting diamond disk instead of the usual nut.
The diamond layer on the end surface of the nut turns it into a full-fledged diamond cutter. This scheme allows you to sand the edge of ceramic tiles immediately after cutting. This makes the process incredibly convenient and productive. Effectively works with both wall ceramic tiles and durable stoneware.
The mill is made in two versions:
-with coarse grain 70/80 for rough grinding, removal of a large amount of material.
-with 100/120 grain for fine finishing work.
Used on angle grinders d.125 with a rotational speed of 11000 rpm without cooling. The nut mill has an M14 thread for attaching to the angle grinder. The diamond layer has a lead-in chamfer for a smooth incision into the material.
The diamond layer on the end surface of the nut turns it into a full-fledged diamond cutter. This scheme allows you to sand the edge of ceramic tiles immediately after cutting. This makes the process incredibly convenient and productive. Effectively works with both wall ceramic tiles and durable stoneware.
The mill is made in two versions:
-with coarse grain 70/80 for rough grinding, removal of a large amount of material.
-with 100/120 grain for fine finishing work.
Used on angle grinders d.125 with a rotational speed of 11000 rpm without cooling. The nut mill has an M14 thread for attaching to the angle grinder. The diamond layer has a lead-in chamfer for a smooth incision into the material.
Video
Subscribe to our channel
Feedback and questions Grinding cup DGW-S 49/M14 Hard Ceramics 70
Feedback
Question
