SKU: 90115007011
Diamond drill DDS-W 68x65-4xM16 Krone PRO / SDS+
SKU: 90115007011
Diamond drill DDS-W 68x65-4xM16 Krone PRO / SDS+
Brick
Concrete
Diameter: 68 mm
Length: 65 mm
Shank type: M16xSDSplus
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
Length
Cooling
Shank type
Brand
Description
Krone PRO
Holes for sockets in brick, aerated concrete, concrete are often made by carbide or, tungsten monocarbide drills. Such drills can only work in hammer mode that is an extremely undesirable condition for both the construction material and the person:
- impact loads causes microcracks into the walls, reduce their load-bearing capacity, destroy the drill itself, and cutting elements are to fall off.,
- often impacts lead to the displacement of holes, in which it is difficult to install the socket block later.,
- vibrations negatively affect the operator himself, and his health.,
- the drilling speed of a hard alloy drill is lower than a diamond drill, especially during the concrete drilling.
The Krone PRO diamond bit for sockets is a great alternative to hard alloy drills. With Krone PRO drilling is gentle and productive. The load on the operators hands is minimal, its a pleasure to work with it!
Available in three diameters: 68, 72, 82 mm with an M16 slot for installing the adapter. The drill bit operates in a dry non-impact mode.
- for drilling of holes for sockets on hammer drills and drills in a dry non-impact mode
- for drilling holes in brick, foam concrete, light non-reinforced concrete
- high speed and lifetime in the specified materials
Holes for sockets in brick, aerated concrete, concrete are often made by carbide or, tungsten monocarbide drills. Such drills can only work in hammer mode that is an extremely undesirable condition for both the construction material and the person:
- impact loads causes microcracks into the walls, reduce their load-bearing capacity, destroy the drill itself, and cutting elements are to fall off.,
- often impacts lead to the displacement of holes, in which it is difficult to install the socket block later.,
- vibrations negatively affect the operator himself, and his health.,
- the drilling speed of a hard alloy drill is lower than a diamond drill, especially during the concrete drilling.
The Krone PRO diamond bit for sockets is a great alternative to hard alloy drills. With Krone PRO drilling is gentle and productive. The load on the operators hands is minimal, its a pleasure to work with it!
Available in three diameters: 68, 72, 82 mm with an M16 slot for installing the adapter. The drill bit operates in a dry non-impact mode.
- for drilling of holes for sockets on hammer drills and drills in a dry non-impact mode
- for drilling holes in brick, foam concrete, light non-reinforced concrete
- high speed and lifetime in the specified materials
Feedback and questions Diamond drill DDS-W 68x65-4xM16 Krone PRO / SDS+
Feedback
Question
