SKU: 910283018008
Diamond drill DDR-V 110x30xM14 Keramik Pro
IT'S PRO SPEED
SKU: 910283018008
Diamond drill DDR-V 110x30xM14 Keramik Pro
IT'S PRO SPEED
Ceramic
Porcelain gres
Diameter: 110 mm
Length: 30 mm
Shank type: M14
The product is out of production
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
Length
Cooling
Shank type
Purpose
Brand
Description
Every year the range of hard, frost-resistant porcelain tiles is expanding, the processing of which is becoming more and more complicated. For cutting and drilling such materials, you need a high-speed tool.
Vacuum drill bits Keramik Baumesser Pro are high-speed drill bits for all types of ceramics and porcelain tiles. High-strength diamond, fixed in a solid bond, forms developed cutting micro-cutters that effectively penetrate the ceramic material.
The average drilling speed of 10 mm thick porcelain tiles with an angle grinder is 7 seconds (5-15 seconds depending on the hardness of the material). It is recommended to set the speed of angle grinder in the range of 8,000-11,000 rpm.
Drilling should be performed in dry mode with swaying movements, avoiding pressure on the drill bit.
It is produced in the diameter range of 6-120 mm for angle grinders 115 and 125 mm.
Vacuum drill bits Keramik Baumesser Pro are high-speed drill bits for all types of ceramics and porcelain tiles. High-strength diamond, fixed in a solid bond, forms developed cutting micro-cutters that effectively penetrate the ceramic material.
The average drilling speed of 10 mm thick porcelain tiles with an angle grinder is 7 seconds (5-15 seconds depending on the hardness of the material). It is recommended to set the speed of angle grinder in the range of 8,000-11,000 rpm.
Drilling should be performed in dry mode with swaying movements, avoiding pressure on the drill bit.
It is produced in the diameter range of 6-120 mm for angle grinders 115 and 125 mm.
Useful information
For easy pre-drilling, use a special EasyFix 70 MECHANIC template
Feedback and questions Diamond drill DDR-V 110x30xM14 Keramik Pro
Feedback
Question
