SKU: 90215008017
Diamond cutting blade Turbo 230 Beton PRO
OPTIMAL FOR CONCRETE
SKU: 90215008017
Diamond cutting blade Turbo 230 Beton PRO
OPTIMAL FOR CONCRETE
Speed
Lifetime
Cutting of reinforcement
Brick
Concrete
Paving slabs
Diameter: 230 mm
Mounting hole: 22.23 mm
The product is out of production
Characteristics
Description
The Baumesser Turbo Beton Pro diamond cutting blade is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mostly used for cutting concrete and concrete products, as well as when working with bricks and paving slabs.
The range includes two types of such blades, which are made with a diameter of 125 and 230 mm. A blade can be used for any kind of angle grinder with a standard mounting hole of 22.23 mm.
During practical use, the blade showed a high level of performance. The blade showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm per minute.
Note that the work was carried out when cutting concrete of the M400 brand with reinforcement of 8 mm and a rebar density of 6 pieces/linear meters.
The range includes two types of such blades, which are made with a diameter of 125 and 230 mm. A blade can be used for any kind of angle grinder with a standard mounting hole of 22.23 mm.
During practical use, the blade showed a high level of performance. The blade showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm per minute.
Note that the work was carried out when cutting concrete of the M400 brand with reinforcement of 8 mm and a rebar density of 6 pieces/linear meters.
Useful information
After 2-3 minutes of continuous operation, it is necessary to take a break for 1 minute to cool the blade. Or rotate the blade at idle.
Positioning of diamond cutting blades for cutting concrete with angle grinder
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 230 mm blade diameter;
• cutting depth – 6 cm;
• pendular cutting;
• working with operational angle grinder with a power of 2.5 kW, with a rotational speed of 6500 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under other operating conditions the performance parameters may vary.
Material:
concrete B30 (M400), reinforcement Ø12 mm,
6 pcs/1 m
Feedback and questions Diamond cutting blade Turbo 230 Beton PRO
Feedback
Question
Popular with this product
