SKU: 10115029020
Diamond cutting blade 1A1R 100 Elegant
Perfect edge even on glaze
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Try in bundle
Characteristics
Brand
Description
Perfect edge even on glaze
Chips are the main difficulty when cutting glazed tiles, red-hot porcelain gres. The decisive factor of the cutting purity is the diamond blade.
The Elegant blade is the best solution for finishing cutting of complex materials.
The disk uses a very fine diamond and a self-sharpening bond. The small diameter of 100 mm of the blade creates advantages during finishing cutting in comparison to the 115 and 125 mm diameters, since it practically does not lead to the sides, the blade has minimal vibrations.
The blade provides such a clean cut that it is almost impossible to find even minimal chips, including on glazed tiles. No further edge processing is required. The blade also leaves no chips on the reverse mounting side of the tile. This is especially important in the manufacture of countertops and ceramic furniture.
This is the cleanest blade from the entire Distar line. Install and enjoy the result.
The blade used on handle angle grinder without the use of coolant.
Chips are the main difficulty when cutting glazed tiles, red-hot porcelain gres. The decisive factor of the cutting purity is the diamond blade.
The Elegant blade is the best solution for finishing cutting of complex materials.
The disk uses a very fine diamond and a self-sharpening bond. The small diameter of 100 mm of the blade creates advantages during finishing cutting in comparison to the 115 and 125 mm diameters, since it practically does not lead to the sides, the blade has minimal vibrations.
The blade provides such a clean cut that it is almost impossible to find even minimal chips, including on glazed tiles. No further edge processing is required. The blade also leaves no chips on the reverse mounting side of the tile. This is especially important in the manufacture of countertops and ceramic furniture.
This is the cleanest blade from the entire Distar line. Install and enjoy the result.
The blade used on handle angle grinder without the use of coolant.
Positioning of gres diamond cutting blades for angle grinders
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 100, 125 mm blade diameter;
• working with operational angle grinder with a power of 1.4 kW, with a rotational speed of 11 000 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under other operating conditions the performance parameters may vary.
Material:
porcelain gres, 10 mm.
Video
Subscribe to our channel
Feedback and questions Diamond cutting blade 1A1R 100 Elegant
Feedback
Question
Popular with this product
