Diamond cutting blade 1A1RSS 350 Sprinter Plus
Diamond cutting blade 1A1RSS 350 Sprinter Plus
SKU: 12485087024

Diamond cutting blade 1A1RSS 350 Sprinter Plus

THE BEST FOR ASPHALT
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №1
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №2
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №3
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №4
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №1
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №2
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №3
Diamond cutting blade 1A1RSS 350 Sprinter Plus, Distar №4
SKU: 12485087024
Diamond cutting blade 1A1RSS 350 Sprinter Plus
THE BEST FOR ASPHALT
Speed
Lifetime
Fresh concrete Asphalt
Diameter: 350 mm
Mounting hole: 25,4-F4 mm
To check price and availability, contact representative in your region
Return of goods
Claims are considered in the case of:
  • Manufacturer’s recommendations for the tool operation have not been violated
  • The wear of the diamond layer shall not exceed 1/3 of its initial height
  • You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
350
Thickness
3.2
Cooling
Bore diameter
Brand
Description
Diamond blade Distar 1A1RSS/C1S-W Sprinter Plus is designed for cutting asphalt and other abrasive materials of the same degree of hardness. The blade is positioned as having a really long lifetime, but quite productive. The lifetime reaches 2000 running meters, at a speed of 1.5-1.8 linear meters /min, depending on the equipment used and the material characteristics.
When cutting asphalt and concrete to a depth of more than 7 centimeters it is recommended to use additional water cooling, and in also to perform work in several approaches, which will reduce the wear of the tool and increase the cutting speed.
Available in several diameters from 300 to 600 millimeters. The blade is used with floor saws and power cutters.
Positioning of diamond cutting blades for cutting asphalt with floor saw

Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 350 mm blade diameter;
• cutting depth – 50 mm;
• straight cutting;
• work with operational floor saw with power of 13 kW and rotation speed 2500 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under different conditions performance parameters may vary.

Material:
asphalt

Feedback and questions Diamond cutting blade 1A1RSS 350 Sprinter Plus
Feedback
Question
Newsletter
Stay up to date with our new products, blog updates, deals and more
Newsletter
Error during saving!
Data saved successfully!
Product added to cart
Product added to favorites
Product added to comparison
Write your answer
Cancel
Thank you
Your answer was successfully sent and will be published after moderation
Confirm your e-mail
A confirmation code was sent to your e-mail
Didn't get the code?
Send again after 60 sec