SKU: 12315011018
Diamond cutting blade 1A1RSS 232 Classic H12
CLASSIC IN CUTTING OF POPULAR MATERIALS
SKU: 12315011018
Diamond cutting blade 1A1RSS 232 Classic H12
CLASSIC IN CUTTING OF POPULAR MATERIALS
Speed
Lifetime
Cutting of reinforcement
Reinforced concrete
Paving slabs
Diameter: 230 mm
Mounting hole: 22.23 mm
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Try in bundle
Diamond cutting blade 1A1RSS 232 Classic H12
230 mm
230 mm
Characteristics
Diameter
Thickness
Cooling
Bore diameter
Purpose
Brand
Description
Diamond cutting blade Distar 1A1RSS C1W CLASSIC H12 is designed for cutting concrete and medium-reinforced concrete. The blade has an increased height of the diamond segment up to 12 millimeters, which provides a sufficiently good lifetime, up to 400 meters on the gasoline power cutter and up to 500 on the floor saw.
It is known for high speed, which reaches the indicators of 2.25 meters and 1.5 meters on the floor saw and power cutter respectively.
Available in diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts).
The Distar CLASSIC H12 is a well-balanced quality blade combining the optimal value for the money. It is positioned in line as 5D extra class.
It is known for high speed, which reaches the indicators of 2.25 meters and 1.5 meters on the floor saw and power cutter respectively.
Available in diameters from 300 to 600 millimeters.
Used on low and medium power equipment (4-9 kilowatts).
The Distar CLASSIC H12 is a well-balanced quality blade combining the optimal value for the money. It is positioned in line as 5D extra class.
Useful information
It is necessary to sharpen the blade when the cutting speed drops. To do this, you need to perform several cuts on a highly abrasive material: silicate brick, screed, plaster, etc.
Positioning of diamond cutting blades for cutting concrete with angle grinder
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 230 mm blade diameter;
• cutting depth – 6 cm;
• pendular cutting;
• working with operational angle grinder with a power of 2.5 kW, with a rotational speed of 6500 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under other operating conditions the performance parameters may vary.
Material:
concrete B30 (M400), reinforcement Ø12 mm,
6 pcs/1 m
Feedback and questions Diamond cutting blade 1A1RSS 232 Classic H12
Feedback
Question
