SKU: 10170516019
Diamond cutting blade 1A1R 200x25,4 Ceramic Silent
Enjoy the silence
SKU: 10170516019
Diamond cutting blade 1A1R 200x25,4 Ceramic Silent
Enjoy the silence
Edge quality
Speed
Lifetime
Porcelain gres
Diameter: 200 mm
Mounting hole: 25.4 mm
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
Thickness
Cooling
Bore diameter
Purpose
Brand
Description
Enjoy the silence
Cutting porcelain gres on machines is a noisy process. It is relevant when you do some internal works.
The best choice is DISTAR blade Ceramic Silent. The blade core has sandwich type. Such core design reduces high frequencies. Noise level is about 10 dB. In fact, you hear the noise of the machine engine only.
The blade is made on the basis of the Hard Ceramic Advanced. The diamond layer has graphite chips.
Ceramic Silent advantages:
- perfect edge.,
- thickness of porcelain – 20mm.,
- noise up to 10dB.,
- blade available in diameters 200 / 230 / 250 mm.,
- used with coolant only.
Cutting porcelain gres on machines is a noisy process. It is relevant when you do some internal works.
The best choice is DISTAR blade Ceramic Silent. The blade core has sandwich type. Such core design reduces high frequencies. Noise level is about 10 dB. In fact, you hear the noise of the machine engine only.
The blade is made on the basis of the Hard Ceramic Advanced. The diamond layer has graphite chips.
Ceramic Silent advantages:
- perfect edge.,
- thickness of porcelain – 20mm.,
- noise up to 10dB.,
- blade available in diameters 200 / 230 / 250 mm.,
- used with coolant only.
Positioning of gres diamond cutting blades for table saws
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 200 mm blade diameter;
• working with operational table saw with a power of 0.8 kW, with a rotational speed of 2900 rpm;
• water feed 3,0 l/min
• at an air temperature of +25 °C.
Material: porcelain gres, 10 mm.
The data is for information only. Under other operating conditions the performance parameters may vary.
/ # / — Edge quality
/ 3 / — Good cut
/ 4 / — Clean cut
/ 5 / — Fine cut
Feedback and questions Diamond cutting blade 1A1R 200x25,4 Ceramic Silent
Feedback
Question
