SKU: 10170085391
Diamond cutting blade Turbo 230 Beton
Speed
Lifetime
Cutting of reinforcement
Brick
Concrete
Paving slabs
Diameter: 230 mm
Mounting hole: 22.23 mm
To check price and availability, contact representative
in your region
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
Thickness
Cooling
Bore diameter
Purpose
Brand
Description
The Turbo Beton diamond cutting blade is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mostly used for cutting concrete and concrete products, as well as when working with bricks and paving slabs.
The range includes two types of such blades, which are made with a diameter of 125 and 230 mm. A blade can be used for any kind of angle grinder with a standard mounting hole of 22.23 mm.
During practical use, the blade showed a high level of performance. The blade showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm per minute.
Note that the work was carried out when cutting concrete of the M400 brand with reinforcement of 8 mm and a rebar density of 6 pieces/linear meters.
The range includes two types of such blades, which are made with a diameter of 125 and 230 mm. A blade can be used for any kind of angle grinder with a standard mounting hole of 22.23 mm.
During practical use, the blade showed a high level of performance. The blade showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm per minute.
Note that the work was carried out when cutting concrete of the M400 brand with reinforcement of 8 mm and a rebar density of 6 pieces/linear meters.
Positioning of diamond cutting blades for cutting concrete with angle grinder
Performance parameters are given for following conditions:
• cutting the material indicated on the charts;
• cutting with 230 mm blade diameter;
• cutting depth – 6 cm;
• pendular cutting;
• working with operational angle grinder with a power of 2.5 kW, with a rotational speed of 6500 rpm;
• at an air temperature of +25 °C.
The data is for information only. Under other operating conditions the performance parameters may vary.
Material:
concrete B30 (M400), reinforcement Ø12 mm,
6 pcs/1 m
Feedback and questions Diamond cutting blade Turbo 230 Beton
Feedback
Question
