SKU: 90115081020
DDR-S 70x25/65x10 Ultra Clean
SKU: 90115081020
DDR-S 70x25/65x10 Ultra Clean
Speed
Lifetime
Ceramic
Porcelain gres
Diameter: 70 mm
Length: 65 mm
Shank type: 10
The product is out of production
Return of goods
Claims are considered in the case of:
- Manufacturer’s recommendations for the tool operation have not been violated
- The wear of the diamond layer shall not exceed 1/3 of its initial height
- You can return the goods within 14 days from the date of purchase, if the original packaging is intact and there are no traces of use.
Characteristics
Diameter
Length
Cooling
Shank type
Purpose
Brand
Description
Ultra Clean drill bits
Qualitatively drilling glazed tiles, glass, fragile porcelain gres without chips is not an easy task. Most drill bits on the market do not cope with this task.
The Baumesser Ultra Clean drill bit comes to the rescue. This is a thin-walled drill made by sintering method. The composition of the diamond-bearing layer includes a small diamond with a special self-sharpening bond.
Thanks to this, drilling takes place almost without chipping, even on the most complex materials. This is especially true on open surfaces.
This drill bit is used on drills, screwdrivers, cooled by water. Pre-drilling should be done with careful wiggling.
Available in three diameters of 6 mm, 35 mm, 70 mm. For a 10 mm shank for a three-cam cartridge.
Qualitatively drilling glazed tiles, glass, fragile porcelain gres without chips is not an easy task. Most drill bits on the market do not cope with this task.
The Baumesser Ultra Clean drill bit comes to the rescue. This is a thin-walled drill made by sintering method. The composition of the diamond-bearing layer includes a small diamond with a special self-sharpening bond.
Thanks to this, drilling takes place almost without chipping, even on the most complex materials. This is especially true on open surfaces.
This drill bit is used on drills, screwdrivers, cooled by water. Pre-drilling should be done with careful wiggling.
Available in three diameters of 6 mm, 35 mm, 70 mm. For a 10 mm shank for a three-cam cartridge.
Feedback and questions DDR-S 70x25/65x10 Ultra Clean
Feedback
Question
